Base Group to wykonawca konstrukcji przemysłowych. Specjalizujemy się w tradycyjnym i zrobotyzowanym spawaniu aluminium, stali nierdzewnej i stali czarnej. Spawanie wykonujemy zgodnie z międzynarodowymi standardami określonymi w normie ISO 3834-2. Na zamówienie Klienta dostarczamy konstrukcje przemysłowe wyprodukowane zgodnie z normą EN 1090-2, EN 1090-3 oraz EN 15085-2.

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Resistant & cut-proof

Anwendung: Verfugen von Geraden, Schamottefliesen in Kachelöfen, Kaminen, Öfen, Gartengrills. Die empfohlene Fugenstärke beträgt 2-3 mm. thermischer Widerstand:1300 °C Verpackung:5 kg Gewicht (kg]:25.0000 Artikelnummer:9005249005862

PX 08 jest jednoskładnikowym, bezbarwnym, szybko wysychającym podkładem poliuretanowym do gruntowania niechłonnych podłoży przed nałożeniem powłok antygraffiti w celu zwiększenia ich przyczepności do podłoża. Po wyschnięciu tworzy elastyczny i przejrzysty film izolujący, który jest mało widoczny lub całkowicie niezauważalny w zależności od rodzaju podłoża, nasłonecznienia i kąta padania światła. Preparat posiada doskonałe właściwości adhezyjne. PX 08 służy do stosowania na powierzchniach niechłonnych typu farby proszkowe, laminaty poliestrowe oraz do większości tworzyw sztucznych i innych trudno przyczepnych podłoży. Preparat może być również stosowany pod aplikację innych powłok malarskich. 

ECOFIX PLUS the best adhesive spray for printing boards ECOFIX PLUS is an high tack adhesive specially indicated for the textile silk-screen printing industry. It is suitable to keep the fabrics steady to their support while being printed. CHEMICAL BASE BASE: Synthetic rubbers and solid resins SOLVENTS: hydrocarbure group, benzen and omologous are absent PROPELLENT: Denaturate odourless hydrocarbure COLOUR: Yellow clear VISCOSITY: Middle IT DOES NOT CONTAINS CFC MAIN CHARACTERISTICS It does not transfer on the fabric or cloths printed. It does not dirty the fabrics. It is suitable for cotton, silk, wool, synthetic fabrics, cotton, mixed. It resists to many applications. It has a good resistance to heat. It is also suitable in embroidery industry to keep the cloth steady during embroidery. In the cut rooms it gets the adhesion of the model to the cloth during the cut. DIRECTIONS FOR USE Shake well the can before use. Spray the product from a distance of 25-30 cm. Remove it with wash solvent perchloroethylene.

Brandschutznachweise für Gebäudeklassen, geregelte Sonderbauten und Industriebau.

Thickness range: 12-75 µm Biaxially oriented PP Optics: transparent, opaque, white, matt, glossy, metallisation on request e.g.: TI-Films, Treofan, Propafilm® Application: Food Industry, Electrical Industry, Release, Graphic Arts Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing Pre-treatment (surface):sealable, different pre-treatments

Planung, Lieferung, Montage, Wartung, Umbau und Reparatur von Rauch- und Wärmeabzugsanlagen

SPN continues to expend its range of products to better meet your needs. Since 2016, SPN proposes semi-finished in shapes of rods from diameter 5 to diameter 20. These rods can be delivered in length of 1, 2 or 3 meters depending of your request.

Konuyla ilgili yönetmelikte Basınçlı Kap ve Tesisatlar ve muayenelerinden şöyle bahsedilir; “Basınçlı kaplarda temel prensip olarak hidrostatik test yapılması esastır. Bu testler, standartlarda aksi belirtilmediği sürece işletme basıncının 1,5 katı ile ve bir yılı aşmayan sürelerle yapılır. Ancak iş ekipmanının özelliği ve işletmeden kaynaklanan zorunlu şartlar gereğince hidrostatik test yapma imkânı olmayan basınçlı kaplarda hidrostatik test yerine standartlarda belirtilen tahribatsız muayene yöntemleri de uygulanabilir. Bu durumda, düzenlenecek periyodik kontrol raporlarında bu husus gerekçesi ile birlikte belirtilir.” hükmüne yer vermiştir.

Grâce à sa teneur très élevée en Polarlite, il garantit 4 effets nanotech extraordinaires : « Polish », pour une brillance à long terme ; « Essuie-glace Liquide », pour un maximum de sécurité en cas de pluie ; « Miroir », pour procurer un effet réfléchissant extraordinaire ; « Soie », pour une carrosserie lisse au toucher. MODE D'EMPLOI ET DILUTIONS : Introduire le produit pur dans l'arc au moyen d'une pompe de dosage avec aspiration de 40-60 ml par voiture, en fonction du niveau de brillance souhaité.

Produktvarianten anzeigen DPF Cleaner enthält ausgesuchte Wirkstoffkombinationen. Diese reduzieren den Russausstoß, verringern die Abgase und verbessern die Motorleistung. Lösen und dispergieren Ablagerungen und Rückstände wie Ölkohle und Ruß. Verbrennt Russpartikel in DPF-Filtern. Erhöht die Betriebssicherheit. Kann in allen Dieselmotoren, auch in neuen Commonrail- und Pumpe-Düsemotoren eingesetzt werden. Eigenschaften: • Reinigt das gesamte System vom Tank bis zum Brennraum • Reduziert Emissionen • Verbessert die Lagerstabilität des Diesel • Verhindert Ablagerungen im Einspritzsystem und an den Einspritzdüsen • Hält den Motor sauber, verbrennt schadstofffreier, verbraucht weniger Diesel und ist dadurch umweltfreundlicher • Durch Cetanzahlerhöhung verbessertes Kaltstartverhalten und weniger Rauchentwicklung • Korrosionsschutz und Entschäumungswirkung • Reduziert Russpartikel durch Nachverbrennung in DPF-Filtern Anwendungsgebiete: Bei Dieselfahrzeugen mit höherer Laufleistung die... Gebinde:Weißblechdose Herkunftsland:Deutschland Inhalt:300ml

DESCRIPTION Façacryl est une peinture de dispersion acrylique de haute qualité spécialement conçue pour les façades. Très bonne adhérence sur toutes les surfaces minérales et diverses. Bon pouvoir couvrant, ne jaunit pas, respirant, parfaitement lavable et bon tendu. Rendement (indicatif) : 6-9 m²/L, selon le support Valeurs limites de l’UE pour ce produit (COV) : Cat. A/a : 30 g/L (2010). Ce produit contient moins de 30 g/L de produits COV.

Propylene Glycol is most commonly used for the large-scale production of polymers. It is used as chemical raw material for the making of unsaturated polyester resins (UPR). It reacts with unsaturated maleic anhydride and isophthalic acid to form a copolymer. It is reacted with propylene oxide to make oligomers and polymers that are consumed for the production of widely used polyurethanes. It is useful in water-based acrylic architectural paints. It’s slow evaporation rate allows it to stop the surface from drying. It is approved for use indirectly as a food additive. It has the E-number E1520 for food applications. It is used in coffee-based drinks, liquid sweeteners, ice cream, and soda etc. It is widely used in cosmetics and pharmaceuticals. E490 is the number for cosmetic products and pharmacological products. It is applicable as a carrier or base for many types of makeup in the cosmetics industry. Acid Number:≤0.5mg KOH/L Water:≤0.5%

Ürünlerinizin üretiminden kaynaklanan sera gazı emisyonlarının detaylı bir analizini sağlar. Bu, üretim prosesinizin çevresel etkisini anlamanıza ve emisyonları azaltmak için değişiklik yapılması gereken alanları belirlemenize yardımcı olur.

Anwendung: Verfugen von Geraden, Schamottefliesen in Kachelöfen, Kaminen, Öfen, Gartengrills. Die empfohlene Fugenstärke beträgt 2-3 mm thermischer Widerstand:1300 °C Verpackung:5 kg Gewicht (kg]:1,0000 Artikelnummer:9005249006425

Adaptés aux hautes températures, le PTFE - Polytétrafluoroéthène - aussi connu sous le nom de Téflon. Il possède une bonne résistance aux produits chimiques et un faible coefficient de frottement. le PTFE est donc utilisé dans l'industrie pour des joints d'étanchéité, des membranes ou des isolations électriques. SPN pourra vous fournir des bandes traitées collables ou des pièces et semi-produits en PTFE chargés carbone, graphite, nickel, chrome, fibre de verre et autres compounds spécifiques.

Produktvarianten anzeigen DPF Cleaner enthält ausgesuchte Wirkstoffkombinationen. Diese reduzieren den Russausstoß, verringern die Abgase und verbessern die Motorleistung. Lösen und dispergieren Ablagerungen und Rückstände wie Ölkohle und Ruß. Verbrennt Russpartikel in DPF-Filtern. Erhöht die Betriebssicherheit. Kann in allen Dieselmotoren, auch in neuen Commonrail- und Pumpe-Düsemotoren eingesetzt werden. Eigenschaften: • Reinigt das gesamte System vom Tank bis zum Brennraum • Reduziert Emissionen • Verbessert die Lagerstabilität des Diesel • Verhindert Ablagerungen im Einspritzsystem und an den Einspritzdüsen • Hält den Motor sauber, verbrennt schadstofffreier, verbraucht weniger Diesel und ist dadurch umweltfreundlicher • Durch Cetanzahlerhöhung verbessertes Kaltstartverhalten und weniger Rauchentwicklung • Korrosionsschutz und Entschäumungswirkung • Reduziert Russpartikel durch Nachverbrennung in DPF-Filtern Anwendungsgebiete: Bei Dieselfahrzeugen mit höherer Laufleistung die... Gebinde:Weißblechdose Herkunftsland:Deutschland Inhalt:250ml

Thickness range: 25-300 µm monoaxial oriented PP Optics:transparent, white Application:Electrical Industry, Label